“Product was delivered promptly. The wall fixings were supplied which made installation much quicker than having to source the parts separately. The rear metal channel had the notches ready cut to fit over the mounting brackets which sets the spacing between the brackets properly. The installation guide was quite helpful however I would recommend using a piece of 2" x 1" wood 3 metres long (local DIY store supplies this cheaply) as a template into which you can mark & drill the holes for the mounting screws. This will make things much easier as you can use this as a template for drilling the wall holes more accurately & will also allow you to ensure that all the holes will line up with brick for a good solid fixing rather than between them in the mortar. Do as suggested & use a spirit level. Check & recheck your levels & make sure that any opening doors or windows will not be fouled by or hit the canopy (I held one bracket against the wall & adjusted the height until I was happy all was well before I began the drilling). Once one hole is drilled the wood can be fixed temporarily at one end then levelled up to ensure all your holes are on one level & spaced properly. The completed installation looks professional & stops the weather nicely. Though not suggested some clear silicon sealant between the wall & the rear metal channel will ensure a totally weatherproof seal. - Mr. M. K.”